Thứ Hai, 13 tháng 6, 2011

Điều chỉnh loa cho B7610

Procedure:
1. Dial Auto Setting code: *#0002*28346#
Now the screen will show 17 device audio settings (and some mic options) you can adjust to set Volume. We will just tackle one setting for it is applicable to all...
Music Speaker- this setting will adjust device's main audio (startup/shutdown tone,phone pad tone, music through the speaker,phone beeps,notifications,game/application audio)
2. Select Music Speaker,and tap "Gain"
Now AFAIK, the only settings you must change are:

QUOTE

OutPut Volume Control (08h)
L1VL2~0 (Main Master Volume)
HPG7~4 (Audio Gain)
Speaker Volume Control (01h)
SPKVOL4~0 (Speaker Volume)

(Other options are for mic, for left and right channels and for power management, let's just leave them)
Now about their values. I'm not sure, but I think the settings uses binary values (0,00,1,11...) By default almost all audio volumes are set in 1110 or 30 in decimal and Master Volume at 101 or 5. The Maximum for the values above are: Master Volume 7 (111), Audio level gain is 15 (1111), Speaker Volume 31 (1111)
The default values of B7610 (Music Speaker) is Master Volume:5 (101) Audio Gain:11 (1011) Speaker Volume:30 (11110)

3. Now we will increase the Music Speaker Audio, again it will increase the following: startup/shutdown tone,phone pad tone, music through the speaker,phone beeps,notifications,game/application audio. Set these Values:

QUOTE

OutPut Volume Control (08h)
L1VL2~0 (Main Master Volume) 111
HPG7~4 (Audio Gain) 1111
Speaker Volume Control (01h)
SPKVOL4~0 (Speaker Volume) 11111 (Note:default is 11101 or 30, so at 1111 or 31 we are just adding 1 level, but really makes the speaker louder)


4.
Now it is important,before hitting apply, to set:

QUOTE

L1VL2~0 (Main Master Volume) 111
HPG7~4 (Audio Gain) 1111

If you missed this and hit apply, there will be no audio. If this happens, don't worry, just edit Music Speaker and set the above and press apply.
You will now have louder internal Speaker Audio....
---------------------------------------------------------------------------------------------------------------------
Now if you want to adjust other audio settings (FM radio speaker,Ringtone,Tvout etc.) Just repeat 1-4 (choosing the selected audio setting of course),and hit apply.
But you will notice you don't have any audio. do step 5.
5. You must set again the "Master Main Volume" which is in Music Speaker values to:
OutPut Volume Control (08h)
L1VL2~0 (Main Master Volume) 111
HPG7~4 (Audio Gain) 1111

Hit apply and you will have the increased/decrease audio for the selected audio setting.
Things to remember:
1. If you intend to increase/decrease volume of the internal speaker of any audio setting, edit below to appropriate level (remember default is 30, so if you wanna increase it (maximum is 31) or lower it, use a scientific calculator to convert, for example 31 to binary, which is 11111)

QUOTE

Speaker Volume Control (01h)
SPKVOL4~0 (00000-11111)

2. If you intend to increase/decrease volume of the earphone output of any audio setting, edit below to appropriate level (Set them with same levels to have balanced stereo audio):

QUOTE


Left Headphone Volume Control (02h)
HPLVOL4~0 (default 11101)
Right Headphone Volume Control (03h)
HPLVOL4~0 (11101)

[/b]

3. After all adjustments be sure to adjust Music Speaker (step 5 above)
That's all rolleyes.gif
Comments:
-Now with these adjustment + setting Music audio effect to SRS WOW, this will make really loud music playing through the speakers...
-Really useful for applications like Pocket Noise and Shoot-Em-Up, which are really fun if your device have loud speakers....

Thứ Bảy, 11 tháng 6, 2011

HACK REGISRY cho các máy Windows Mobile nói chung

Chú ý : Thay đổi registry có thể gây nguy hiểm cho máy, do đó không nên thực hiện việc thay đổi dưới đây trừ khi bạn biết chắc rằng mình đang làm gì. Và nếu bạn không phải là chuyên gia thì tốt nhất đừng nên thử nhé !.
HACK Registry là gì ?
Đây là quá trình thay đổi một số thông tin, giá trị trong bảng Registry của Windows Mobile qua đó làm thay đổi, đóng hay mở một số tính năng bị windows giấu, hoặc giấu đi các tính năng mà bạn không thích…
Các hướng dẫn dưới đây là chung cho các dòng windows mobile nói chung. Tuy nhiên mỗi dòng máy, dòng hệ điều hành khách nhau sẽ có một chút khác nhau.
Để có thể thực hiện việc thay đổi registry bạn phải có một trong các chương trình sau :
PHM Registry Editor (miễn phí : tải về từ http://www.thienlong.org/support ).
Total Commander (Miễn phí tải về từ http://www.thienlong.org/support ).
Resco Registry
Chạy các chương trình HACK registry bạn vào các đường dẫn registry và sửa theo ý mình các thông số chung như sau.
1. Thay đổi phím mềm trên màn hình Today
Cài đặt của phím left-hand softkey (phím mềm trái) tại : 'HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\1 12',
Cài đặt của phím right hand softkey (phím mềm phải ) tại : 'HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\1 13'
Dòng ký tự trong 'Default' bạn có thể đổi thành bất cứ dòng chữ nào mà bạn muốn hiển thị trên màn hình chờ.
Dòng chữ trong 'Open' bạn có thể thay đổi thành chương trình mà bạn muốn nó sẽ chạy khi các phím mềm này được bấm.
Ví dụ : để thay đổi phím trái (left-hand softkey) để khi bấm nó thì khởi động chương trình Pocket Excel bạn sửa lại như sau :
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2\(Default) = Pocket Excel
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2\Open = \windows\pxl.exe
Nếu bạn muốn thay đổi phím trái (left-hand softkey) thành phím gọi chương trình nhắn tin bạn cài như sau :
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2\(Default) = Messages
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2\Open = \Windows\tmail.lnk
Nếu bạn muốn thay đổi phím phải ( right-hand softkey ) khi bấm sẽ gọi danh bạ ( Contacts) bạn chỉnh lại thành
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 3\(Default) = Contacts
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 3\Open = \Windows\?AppButtons\Contacts.lnk
__________________________________________________ ____
2. Cài đặt hay xoá bỏ giao diện do nhà cung cấp cài sẵn :
Tại registry 'HKEY_LOCAL_MACHINE\Security\Phone\Skin'
Giá trị của 'Enabled' DWORD bạn nhập là '1' để hiển thị giao diện do nhà cung cấp cài và nhập vào '0' để hiển thị giao diện chuẩn (default skin )
Ví dụ sau sẽ hiển thị giao diện chuẩn
HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0
__________________________________________________ ____
3. Hiển thị hay giấu đi kết nối GPS trong bảng connections
Tại registry 'HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings'
Giá trị 'Hide' DWORD bạn nhập '0' hay xoá đi để hiển thị bảng GPS và nhập '1' để ẩn bảng này đi.
Giá trị 'Group' DWORD nếu cài là '2' thì sẽ hiển thị bảng GPS và xoá bỏ thì nó sẽ ẩn bảng GPS.
Ví dụ : để hiển thị kết nối GPS trong bảng connections
HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings\Hide = 0
HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings\Group = 2
__________________________________________________ ____
4. Thay đổi khả năng cho phép nhận file qua Bluetooth (OBEX)
Tại giá trị registry 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex'
Giá trị 'IsEnabled' DWORD nếu bạn cài là '1' sẽ bật chức năng OBEX và '0' để tắt chức năng OBEX.
Ví dụ : Để bật chức năng truyền file qua Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabl ed = 1
(còn tiếp)...

5.Cài đặt kết nối để luôn luôn giữ kết nối
• Cài đặt tại địa chỉ : 'HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A 38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\(Tên kết nối GPRS)'
o(Tên kết nối GRPS) là tên của kết nối mà bạn dùng để kết nối với mạng.
• Giá trị 'AlwaysOn' DWORD nếu cài thành '1' thì kết nối sẽ giữ hoặc nếu cài là '0' thì nó sẽ tự ngưng kết nối khi không sử dụng.
Ví dụ cài đặt giữ kết nối cho máy T-Mobile MDA Pro
• HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A3 8-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\T-Mobile Internet\AlwaysOn = 1
________________________________________
6. Hiển thị hay không hiển thị biểu tượng để quay màn hình ở màn hình ngòai
• Cài đặt tại địa chỉ 'HKEY_LOCAL_MACHINE\System\GDI\ROTATION'
• Giá trị 'HideOrientationUI' DWORD nếu cài là '1' sẽ giấu đi biểu tượng và nhập giá trị '0' để hiển thị biểu tượng trên màn hình.
Ví dụ để hiển thị biểu tượng để quay màn hình :
• HKEY_LOCAL_MACHINE\System\GDI\ROTATION\HideOrienta tionUI = 1
________________________________________
7. Kích họat chức năng MS Voice Command từ tai nghe BT :
Chức năng này làm tăng thêm khả năng cho nhận lệnh bằng giọng nói của JASJAR
• Bạn cài đặt một Voice Command vào vị trí mặc định.
• Chạy chương trình registry editor
• Tới địa chỉ : HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
• Sửa chuỗi "path" tại vị trí mặc định \Windows\SDDialer.exe thành \Program Files\Voice Command\?VoiceCMD.exe
• Bây giờ khi bạn bấm nút kết nối trên Bluetooth chức năng MS Voice command sẽ tự động bật lên và nhận lệnh thông qua tai nghe Bluetooth
________________________________________
8. Bỏ chức năng Start Menu Animation
• Tại địa chỉ HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu key.
• Cài đặt giá trị "AniType" thành 0 (Nếu bạn cài giá trị là 6 thì nó sẽ trở thành full animation).
• Thực hiện Soft Reset.
________________________________________
9. Bật chức năng Window Animation
• Tại địa chỉ HKEY_LOCAL_MACHINE\SYSTEM\GWE key.
• Bạn cài giá trị của "Animate" là 1 (Nếu cài giá trị này là 0 máy sẽ trở lại không animation).
• Thực hiện Soft reset.
________________________________________
10. Đổi phiên bản Pocket IE thành IE phiên bản 5.5 (Cái này dùng khi bạn duyệt một số trang web server không thể biết là đang truy cập từ PPC)
• Tại địa chỉ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Internet Settings\User Agent\ key.
• Cài giá trị thành "Mozilla/4.0" (Mặc định là "Mozilla/2.0").
• Cài giá trị của "Version" thành "MSIE 5.5" (Mặc định là "MSIE 3.02").
•Cài giá trị của "Platform" thành "Windows NT 5.0" (Mặc định là "Windows CE").
Việc hack này làm cho chương trình Pocket Internet Explorer nó tự hiểu nó đang là IE 5.5 chạy trên Windows 2000. Tuy nhiên việc này cũng có hại là một số site có hỗ trợ PPC lại không hiểu đang truy nhập bằng PPC do đó sẽ cung cấp không đúng các thông tin như kích thước site…
(Còn tiếp )....